top of page

Inner Journeys, LLC Group

Public·31 members

How to Unlock the Full Potential of Your Mitsubishi with EvoScan V2.6


Mitsubishi EvoScan V2.6 Full Version: A Must-Have Software for Mitsubishi Tuning and Diagnostics




If you own a Mitsubishi Lancer Evo or a Subaru, you know how important it is to keep your engine running smoothly and efficiently. You also know how challenging it can be to tune your engine, diagnose fault codes, and remap your ECU. That's why you need Mitsubishi EvoScan V2.6 Full Version, the ultimate software for Mitsubishi tuning and diagnostics.




Mitsubishi EvoScan V2.6 Full Version



What is Mitsubishi EvoScan V2.6 Full Version?




Mitsubishi EvoScan V2.6 Full Version is a software that allows you to connect your laptop to your vehicle's OBD (On Board Diagnostic) data link connector and access vital engine parameters. You can use the software to log data, monitor performance, adjust settings, and flash your ECU with custom maps. You can also use the software to clear DTC (Diagnostic Trouble Codes) or CEL (Check Engine Light) codes and perform SST (Sport Shift Transmission) teach-ins.


What are the benefits of using Mitsubishi EvoScan V2.6 Full Version?




Using Mitsubishi EvoScan V2.6 Full Version has many benefits for your vehicle and your wallet. Here are some of them:


  • You can keep your engine safe by logging vital engine parameters such as knock sum, knock learn, fuel trims, RPM, speed, load, airflow, air and water temps, timing, boost, oil pressure, oil temp, wideband AFR, EGT, and more.



  • You can optimize your engine performance and fuel economy by tuning your engine with the built-in map tracer and ecu reflashing features. You can also use the virtual dyno feature to measure your horsepower and torque.



  • You can save money by using your factory stock ECU instead of buying expensive aftermarket ECU upgrades. You can also avoid costly repairs by diagnosing and fixing issues before they become serious.



  • You can enjoy a smoother and faster driving experience by using the SST tuning guide, ROMs and instruction packs that allow you to adjust your SST settings such as rolling S-Sport mode, gear shifts, clutch pressure, launch control boost, and more.



How to use Mitsubishi EvoScan V2.6 Full Version?




Using Mitsubishi EvoScan V2.6 Full Version is easy and convenient. All you need is a laptop with Windows XP/7/8/8.1/10/11 (yes Windows 11 Support!), a USB cable (Tactrix OpenPort 2.0 recommended), and the software itself. Here are the steps to use the software:


  • Download and install the software from here. You can also get a special bonus of two surprise programs when you purchase the software.



  • Connect the USB cable to your laptop and your vehicle's OBD data link connector (usually located under the driver's steering wheel).



  • Launch the software and select your vehicle's model and year from the vehicle settings.



  • Choose what you want to do with the software: datalogging, ecu reflashing, DTC clearing, SST teach-in, etc.



  • Follow the instructions on the screen and enjoy the results.



What are the features of Mitsubishi EvoScan V2.6 Full Version?




Mitsubishi EvoScan V2.6 Full Version is packed with features that make it the most advanced and versatile software for Mitsubishi tuning and diagnostics. Here are some of the features that you can enjoy with the software:


  • You can datalog up to 700 samples per second using the RAX EvoX/Ralliart ROM MOD, which is the fastest vehicle datalogger in the world.



  • You can datalog support for TephraModXv3 roms, SSTModv3, and full datalogging support for EvoX and Ralliart.



  • You can display instantaneous fuel consumption in Litres/100km and MPG, as well as 0-100kph/0-60mph time and 100-0kph/60-0mph time.



  • You can use the map tracer for fast tuning and built-in direct map editing and ecu reflashing. You can also use the hotkeys to flash the updated rom to the vehicle quickly and with minimal effort.



  • You can use the virtual dyno feature with additional smoothing options and a wider range of csv log files.



  • You can clear DTC or CEL codes on all Mitsubishi models from 1990 onwards, including EvoX and Ralliart.



  • You can perform SST teach-ins using the integrated feature in EvoScan Version 3, which is much easier than using PassThruCan.



How much does Mitsubishi EvoScan V2.6 Full Version cost?




Mitsubishi EvoScan V2.6 Full Version is a very affordable software for Mitsubishi tuning and diagnostics. You can purchase the software from here for only $25 USD. This includes the EvoScan v3.1 update file and two special surprise bonus programs. You can also download the software for free if you have already purchased a previous version of EvoScan.


However, you will also need a USB cable to connect your laptop to your vehicle's OBD data link connector. The recommended cable is the Tactrix OpenPort 2.0, which is capable of reflashing a large number of newer Subaru and Mitsubishi vehicles. You can purchase the cable from here for $169 USD. The cable works great with EvoScan v2.9 and above.


If you have an older Mitsubishi vehicle (1990-1996), you will need a different cable, such as the EvoScan OpenPort 1.3R or 1.3U, which have a 12 pin connector that is already attached to them. You can purchase these cables from here for $97 USD.


Alternatively, you can use any generic OBDII USB cable that supports the KWP2000/SAE/ISO standard, but you may not be able to access all the features and functions of Mitsubishi EvoScan V2.6 Full Version.


How to download and install Mitsubishi EvoScan V2.6 Full Version?




Downloading and installing Mitsubishi EvoScan V2.6 Full Version is very easy and straightforward. Here are the steps to download and install the software:


  • Go to this page and click on the "Add to cart" button. You will be redirected to a secure checkout page where you can pay with PayPal or credit card.



  • After you complete the payment, you will receive an email with a download link for the software. You can also log i